Is your auto glass covered in stubborn stickers? Are you dreading the sticky residue it leaves behind? Removing stubborn stickers from your auto glass can be no less than an ordeal – especially when you know that if you try to remove it the wrong way, it may end up harming your auto glass.

The adhesives used in windshield stickers are quite strong and cannot be removed just by scraping. Most people use razor blades and other tools to get rid of those stickers, however, these tools can severely damage your windshield, so you need to remove them carefully using the appropriate techniques.

We have compiled a step by step guide on how to safely remove stickers from your auto glass.

• Put All the Scraping Tools Away

The first thing that most drivers do when they are unable to get a sticker off their windshield is to take out their keys and start scraping at the sticker. This is a terrible way to get rid of the stickers, as it badly damages the auto glass and does not remove the adhesive. Some drivers resort to using razor blades and screwdrivers, which is equally worse. These tools will do more damage than good – so keep all such tools away.

• Spray the Affected Area with Water

After you have kept all the tempting but harmful tools away, grab a spray bottle and spray some water onto the sticker or decal. Alternatively, you could wash your entire car. This helps in softening up and loosening the sticker, and prepares it for the additional decal removing products that will be added later.

• Carefully Remove the Sticker

Remove the sticker or decal carefully – start by scraping away from the corner using your fingernail and move towards the opposite direction. If the sticker starts tearing up, start scraping the other corner and continue repeating this step until all corners are scraped up. Once all the corners have been scraped, you need to attempt at removing the remaining sticker with your fingernail. Remove as much as you can – but do not worry if some of it remains.

This ultimate guide on how to safely remove stickers from your auto glass will help you get rid of all the stains without causing any damaging to the glass – so make sure you follow all these steps one by one, instead of rushing all the way to the end!

• Use the Right Products to Remove the Remaining Product

You can use products such as rubbing alcohol, WD – 40, thinner and nail polish remover to get rid of the remaining product. It is recommended to use WD – 40, as it is a penetrating oil made for the purpose of removing windshield stickers and effectively removes all the stubborn adhesive stains. Pour some onto the sticker and let it sit for about a minute or two. Once the oil has been absorbed, use a special windshield-safe razor blade to remove the remaining product. These blades will not harm your auto glass, as they are specifically made for that purpose.

• Wipe the Glass Clean

Once you have completed all the above-mentioned steps, take a microfiber cloth and wipe the glass clean. Do not use any sponges or rags, as these can leave scratches on the surface of the glass. Make sure to wipe away all the grease from the WD – 40.
We hope that this foolproof guide on how to safely remove stickers from your auto glass helps you in removing all those pesky sticker stains to reveal a clean and polished glass surface.